35BYJ46 motar maganadisu ta dindindin, motar stepper 35mm tare da akwatin gear Hoto Mai Kyau

35BYJ46 motar stepper mai ɗorewa ta maganadisu mai 35mm tare da akwatin gearbox

Takaitaccen Bayani:

Lambar Samfura:35BYJ46

Nau'in mota:	Injin stepper na dindindin na gearbox
Kusurwar mataki:	7.5°/85(Mataki na 1-2）15°/85 (mataki na 2-2)
Girman mota:	35mm
Kayan injin:	ROHS
Zaɓuɓɓukan rabon gear:	25:1, 30:1, 41.6:1, 43.75:1, 85:1
Mafi ƙarancin adadin oda:	Naúrar 1

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Bayani

35BYJ46 injin maganadisu ne na dindindin mai diamita mm 35 tare da giya.
Motar tana da rabon gear na 1/85 kuma ita ce motar stepper ta yau da kullun wacce take da sandar guda ɗaya mai matakai huɗu tare da akwatin gear mai rabon gear 85 a samanta, don haka kusurwar mataki ita ce 7.5°/85.
Ana kuma samun rabon gearbox na 25:1, 30:1, 41.6:1, 43.75:1 ga abokan ciniki don zaɓa daga ciki.
Motar ta dace da tuƙin DC mai ƙarfin 12V. Hakanan akwai ƙarfin lantarki mai ƙarfin 24V.
An yi amfani da wannan motar stepper sosai a dukkan masana'antu saboda farashi mai rahusa da kuma ingantaccen aiki, kuma ana samar da ita da adadi mai yawa kowace shekara.
Ci gaba da samarwa yana sa ingancin wannan motar ya kasance mai ƙarfi sosai kuma farashin ya yi ƙasa da sauran injinan.
Direbobin motocin stepper na PM guda ɗaya na yau da kullun suna iya tuƙa wannan motar.
Idan kuna da sha'awa, don Allah ku tuntube mu.

Sigogi

Wutar lantarki (V)	Juriya(Ω)	Juyawar juyi 100PPS (mN*m)	Ƙarfin juyi mai ƙarfi (mN*m)	Sauke Mitar Jawowa (PPS)
12	40	≥198	≥78.4	≥350
12	100	≥166	≥78.4	≥350
24	130	≥147	≥78.4	≥350
24	400	≥168	≥78.4	≥350

Zane zane: Za a iya daidaita shaft ɗin fitarwa

Ltems masu iya daidaitawa

Rabon gear,
Wutar lantarki: 5-24V,
Rabon gear,
Kayan kayan aiki,
Shaft ɗin fitarwa,
Tsarin hular motar da za a iya gyarawa

Game da tsarin asali na injin stepper na PM

Fasaloli & Riba

1. Matsayi mai kyau
Tunda steppers suna motsawa a cikin matakan da za a iya maimaitawa daidai, suna da kyau a aikace-aikace waɗanda ke buƙatar daidaiton daidaito
matsayi, ta hanyar adadin matakan da injin ke motsawa
2. Babban daidaitaccen saurin sarrafawa
Daidaitaccen ƙaruwar motsi kuma yana ba da damar sarrafa saurin juyawa don tsari.
sarrafa kansa da kuma na'urorin robot. Saurin juyawa yana ƙayyade ta hanyar mitar bugun jini.
3. Dakatarwa da riƙe aikin
Tare da sarrafa tuƙi, injin yana da aikin kullewa (akwai wutar lantarki ta hanyar windings na mota, amma
injin ba ya juyawa), kuma har yanzu akwai fitarwa mai riƙewa.
4. Tsawon rai da ƙarancin tsangwama na lantarki
Motar stepper ba ta da goge-goge, kuma ba ta buƙatar goge-goge kamar goge-goge.
Motar DC. Babu gogayya ta goga, wanda ke ƙara tsawon rayuwar sabis, ba shi da walƙiyar lantarki, kuma yana rage tsangwama ta hanyar lantarki.

Amfani da injin stepper na PM

Firinta,
Injinan yadi,
Sarrafa masana'antu,
kayan tsafta,
bawul ɗin thermostat,
famfunan ruwan zafi,
Daidaita zafin ruwa ta atomatik
Makullan ƙofa
Na'urar sanyaya daki
Bawul ɗin tsarkake ruwa, da sauransu.

Ka'idar aiki na stepper motor

Manhajar software ce ke sarrafa tuƙin motar stepper. Idan injin yana buƙatar juyawa, tuƙin zai yi aiki.
Yi amfani da bugun motar stepper. Waɗannan bugun suna ƙara wa motar stepper ƙarfi a cikin takamaiman tsari, don haka
yana sa na'urar juyawa ta motar ta juya a wani takamaiman alkibla (agogo ko akasin agogo).
a tabbatar da cewa injin ya yi daidai da juyawar da aka yi masa. Duk lokacin da injin ya karɓi bugun daga direba, zai juya ta hanyar kusurwar mataki (tare da cikakken tuƙi), kuma kusurwar juyawar motar ana tantance ta da adadin bugun da aka yi masa da kuma kusurwar mataki.

Lokacin Gabatarwa

Idan muna da samfura a hannun jari, za mu iya jigilar samfuran cikin kwana 3.
Idan ba mu da samfura a hannun jari, muna buƙatar samar da su, lokacin samarwa shine kimanin kwanaki 20 na kalanda.
Don samar da taro, lokacin jagora ya dogara da adadin oda.

Marufi

Ana sanya samfuran a cikin soso mai kumfa tare da akwatin takarda, ana jigilar su ta hanyar gaggawa

Ana samar da injina da yawa, ana sanya su a cikin kwalaye masu rufi tare da fim mai haske a waje. (ana jigilar su ta iska)

Idan aka kawo samfurin ta teku, za a sanya shi a kan fakiti

Hanyar biyan kuɗi da sharuɗɗan biyan kuɗi

Ga samfurori, gabaɗaya muna karɓar Paypal ko alibaba.
Don samar da kayayyaki da yawa, muna karɓar biyan kuɗi na T/T.

Don samfurori, muna karɓar cikakken biyan kuɗi kafin samarwa.
Don samar da kayayyaki da yawa, za mu iya karɓar kashi 50% na kuɗin da aka biya kafin a samar, sannan mu karɓi sauran kashi 50% na kuɗin kafin a kawo.
Bayan mun yi aiki tare da oda fiye da sau 6, za mu iya yin shawarwari kan wasu sharuɗɗan biyan kuɗi kamar A/S (bayan gani)

Tambayar da Ake Yawan Yi

1. Yana haifar da kuma mafita ga injinan stepper waɗanda ke kammala hanzari amma suna daina juyawa idan sun kai ga saurin da ya dace.
Dalili: Motar stepper tana aiki a iyakar ƙarfinta kuma tana tsayawa saboda yawan hanzari. Rotor yana girgiza kuma yana aiki ba tare da tsayawa ba.
Mafita.
① Rage hanzari, wato zaɓi ƙaramin hanzari ko amfani da matakai biyu daban-daban na hanzari, mafi girma a farkon da ƙasa kusa da matsakaicin gudu.
②Ƙara ƙarfin juyi
③Ƙara damper na injiniya a kan shaft na baya, amma wannan yana ƙara ƙarfin juyawar rotor
④ Yi amfani da hanyar haɗin gwiwa