Injin stepper na gearbox mai siffar murabba'i 35mm (NEMA 14) mai siffar murabba'i
Bayani
Wannan injin stepper ne mai siffar gearbox mai siffar murabba'i 35mm (NEMA 14) mai siffar murabba'i.
Tsawon motar wannan samfurin gabaɗaya yana tsakanin 27 zuwa 42mm, ana iya keɓance tsayi na musamman. Tsawon tsawon, ƙarfin motar ya fi girma.
Injinan stepper masu haɗaka gabaɗaya siffarsu murabba'i ne kuma ana iya gane injinan stepper ta hanyar siffarsu ta waje daban.
Bugu da ƙari, akwai zaɓuɓɓuka guda biyu don kusurwar matakalar motar: digiri 0.9 da digiri 1.8.
Nau'in shaft ɗin fitarwa, shaft ɗinmu na yau da kullun shaft ne na D, ana iya keɓance shi don dacewa da buƙatun mai amfani.
Ana iya amfani da tsawon wayar jagora da nau'in mahaɗin tare da masu haɗin da aka saba, waɗanda kuma za a iya keɓance su.
Ana samun injin stepper mai haɗin gwiwa tare da kusurwar mataki 1.8° (matakai 200/juyin juya hali) ko kusurwar mataki 0.9° (matakai 400/juyin juya hali). ko kusurwar mataki 0.9° (matakai 400/juyin juya hali). Ana ƙayyade kusurwar mataki ta hanyar adadin haƙoran da ke kan ruwan rotor.
Haka kuma za a iya sanya masa akwatin gear, wanda ke da matakai daban-daban na gear don bambancin rabon gudu da kuma tsayi daban-daban, tsawon lokacin da tsayin ya yi ƙasa da yadda ake buƙata.
Sigogi
| Kusurwar Mataki (°) | Tsawon injin (mm) | Riƙe ƙarfin juyi (g*cm) | Na yanzu /fasaha (A/fasaha) |
Juriya (Ω/fasaha) | Inductance (mH/lokaci) | Adadin jagorori | Juyawan inertia (g*cm)2) | Nauyi (KG) |
| 0.9 | 27 | 1000 | 0.5 | 10 | 14 | 4 | 6 | 0.13 |
| 1.8 | 28 | 1000 | 0.5 | 20 | 14 | 4 | 11 | 0.13 |
| 0.9 | 34 | 1200 | 1 | 2 | 3 | 4 | 9 | 0.17 |
| 1.8 | 34 | 1400 | 1 | 2.7 | 4.3 | 4 | 13 | 0.17 |
| 0.9 | 40 | 1500 | 1 | 2 | 4 | 4 | 12 | 0.22 |
| 1.8 | 42 | 2000 | 1 | 3.8 | 3.5 | 4 | 23 | 0.22 |
Sigogi na sama samfuran yau da kullun ne don tunani, ana iya keɓance injin bisa ga buƙatun abokin ciniki.
Zane Zane
Tsarin asali na injinan stepper na NEMA
Amfani da Hybrid stepper motor
Saboda ƙudurin ƙarfin injin stepper na hybrid (matakai 200 ko 400 a kowace juyi), ana amfani da su sosai don aikace-aikacen da ke buƙatar babban daidaito, kamar:
Bugawa ta 3D
Sarrafa Masana'antu (CNC, injin niƙa ta atomatik, injinan yadi)
Kayan aikin kwamfuta
Injin shiryawa
Da kuma sauran tsarin atomatik da ke buƙatar cikakken iko.
Bayani game da injinan stepper masu haɗin gwiwa
Ya kamata abokan ciniki su bi ƙa'idar "zaɓar injinan stepper da farko, sannan a zaɓi direba bisa ga injin stepper da ke akwai"
Zai fi kyau kada a yi amfani da yanayin tuƙi mai cikakken mataki don tuƙa motar takalmi mai haɗaka, kuma girgizar ta fi girma a ƙarƙashin tuƙi mai cikakken mataki.
Motar stepper mai haɗaka ta fi dacewa da lokutan ƙarancin gudu. Muna ba da shawarar cewa gudun bai wuce rpm 1000 ba (6666PPS a digiri 0.9), zai fi dacewa tsakanin digiri 1000-3000PPS (digiri 0.9), kuma ana iya haɗa shi da akwatin gear don rage saurinsa. Motar tana da ingantaccen aiki da ƙarancin hayaniya a mitar da ta dace.
Saboda dalilai na tarihi, injin da ke da ƙarfin lantarki na 12V kawai yana amfani da 12V. Sauran ƙarfin lantarki da aka ƙididdige akan zane ba shine ainihin ƙarfin lantarki mafi dacewa ga motar ba. Abokan ciniki ya kamata su zaɓi ƙarfin lantarki mai dacewa da direba mai dacewa bisa ga buƙatunsu.
Idan ana amfani da injin tare da babban gudu ko babban kaya, yawanci ba ya farawa da saurin aiki kai tsaye. Muna ba da shawarar a hankali ƙara mita da gudu. Saboda dalilai biyu: Na farko, injin ba ya rasa matakai, na biyu kuma, yana iya rage hayaniya da inganta daidaiton wurin aiki.
Bai kamata injin ya yi aiki a yankin girgiza ba (ƙasa da 600 PPS). Idan dole ne a yi amfani da shi a hankali, za a iya rage matsalar girgiza ta hanyar canza ƙarfin lantarki, wutar lantarki ko ƙara ɗan damping.
Idan injin yana aiki ƙasa da digiri 600 (0.9), ya kamata ya kasance ƙarƙashin ƙaramin wutar lantarki, babban inductance da ƙarancin wutar lantarki.
Ga kayan aiki masu yawan inertia, ya kamata a zaɓi babban injin.
Idan ana buƙatar ƙarin daidaito, ana iya magance shi ta hanyar ƙara akwatin gearbox, ƙara saurin motar, ko amfani da tuƙin yanki. Haka kuma ana iya amfani da injin mai matakai 5 (motar unipolar), amma farashin tsarin gaba ɗaya yana da tsada sosai, don haka ba kasafai ake amfani da shi ba.
Girman motar stepper:
A halin yanzu muna da injinan stepper masu haɗin gwiwa na 20mm (NEMA8), 28mm (NEMA11), 35mm (NEMA14), 42mm (NEMA17), 57mm (NEMA23), 86mm (NEMA34). Muna ba da shawarar a fara tantance girman injin, sannan a tabbatar da wasu sigogi, lokacin da kuka zaɓi injin stepper mai haɗin gwiwa.
定制服务：
Sabis na keɓancewa:
Muna ba da sabis na keɓancewa akan injin, gami da lambar wayar jagora (wayoyi 4/wayoyi 6/wayoyi 8), juriyar coil, tsawon kebul da launi, kuma muna da tsayi da yawa don abokan ciniki su zaɓa.
Shaft ɗin fitarwa na yau da kullun shine shaft ɗin D, idan abokan ciniki suna buƙatar shaft ɗin sukurori na jagora, muna ba da sabis na keɓancewa akan sukurori na gubar, kuma kuna iya daidaita nau'in sukurori na gubar da tsawon shaft.
Hoton da ke ƙasa akwai injin stepper na yau da kullun tare da sukurori na jagora na trapezoidal.
Lokacin Gabatarwa
Idan muna da samfura a hannun jari, za mu iya jigilar samfuran cikin kwana 3.
Idan ba mu da samfura a hannun jari, muna buƙatar samar da su, lokacin samarwa shine kimanin kwanaki 20 na kalanda.
Don samar da taro, lokacin jagora ya dogara da adadin oda.
Hanyar biyan kuɗi da sharuɗɗan biyan kuɗi
Hanyar biyan kuɗi da sharuɗɗan biyan kuɗi:
Ga samfurori, gabaɗaya muna karɓar Paypal ko alibaba.
Don samar da kayayyaki da yawa, muna karɓar biyan kuɗi na T/T.
Don samfurori, muna karɓar cikakken biyan kuɗi kafin samarwa.
Don samar da kayayyaki da yawa, za mu iya karɓar kashi 50% na kuɗin da aka biya kafin a samar, sannan mu karɓi sauran kashi 50% na kuɗin kafin a kawo.
Bayan mun yi aiki tare da oda fiye da sau 6, za mu iya yin shawarwari kan wasu sharuɗɗan biyan kuɗi kamar A/S (bayan gani)
Tambayoyin da ake yawan yi akai-akai
1. Har yaushe ne lokacin isar da samfura gabaɗaya? Har yaushe ne lokacin isar da manyan oda na baya-baya?
Lokacin isar da samfurin yana ɗaukar kimanin kwanaki 15, lokacin isar da umarni na adadi mai yawa shine kwanaki 25-30.
2. Shin kuna karɓar ayyukan musamman?
Muna karɓar samfuran da aka ƙera musamman. gami da sigar mota, nau'in waya mai gubar, shaft mai fita da sauransu.
3. Shin zai yiwu a ƙara lambar sirri a cikin wannan injin?
Don wannan nau'in motar, za mu iya ƙara lambar sirri a kan murfin lalacewa na motar.
Aika mana da sakonka:
Nau'ikan samfura
-
NEMA34 86mm layi na matasan stepper motor externa...
-
NEMA11 28mm layi na matasan stepper motor ba tare da hula ba ...
-
Motar stepper ta NEMA8 20mm mai hawa 1.8 mataki...
-
Motar stepper mai girman 28mm NEMA11 mai ƙarfin lantarki digiri 1.8...
-
NEMA 6 mai inganci mai matakai biyu mai waya 4 mai waya 14mm hyb...
-
20mm NEMA8 mai layi na matasan stepper motor tare da gudu ...